Waterco Supastream Solar Pump, 0.75hp
$700.00
The Waterco Supastream is the pump we pair with Zane solar pool heating. On a solar system its job is simple: push pool water up to the roof collectors and bring it back warm. Too little flow and the system can't move the heat. Too much and the water rushes through before it picks any up. Getting the size right matters.
The 0.75hp is the middle of the range and the one that suits a lot of single-storey Adelaide homes with a standard run from the pool equipment to the roof. Not sure which size you need? Call the team on (08) 8262 9617 and we'll work it out with you.
Sold as the matching pump for our Zane Gulfstream DIY kits, or as a straight replacement for a tired solar pump on an existing system. Pair it with a Zane PC5 controller so it only runs when the roof can add heat.
Price $700 including GST.
Quantity
Specifications
• Model: Waterco Supastream 0.75hp
• Power: 0.75hp nominal (0.61kW)
• Power supply: 220 to 240V, single phase, 50Hz
• Motor speed: 2860rpm
• Ports: 40mm, with 40mm barrel unions
• Electrical rating: IPX4
• Overall length: 536mm
• Use: solar pool heating circulation and general pool recirculation
Figures are from Waterco's published specifications and may change without notice.
Key Features
• Self-priming design for easier start-ups
• One-piece moulded body with a built-in strainer pot and basket that catches debris before it reaches the impeller
• 316 stainless steel mechanical seal, suited to chlorine, salt and mineral pools
• Secondary seal and drain line that carry any leak away from the motor
• Fan-cooled motor with thermal overload protection, IPX4 rated
• Quick-connect barrel unions for simple fitting and removal
• Matched to Zane solar pool heating and the Zane PC5 solar controller
Warranty
Waterco manufacturer's warranty for domestic use: 3 years on the wet end, and 2 years on the motor, mechanical seal, O-ring, basket and impeller. Commercial use is covered for 1 year. Warranty conditions apply, so keep your receipt. If something goes wrong, call us on (08) 8262 9617 and we'll help you sort it out.
Delivery & Support
Collect from our Beverley showroom or ask us to quote delivery. Phone (08) 8262 9617 or email sales@bpp.com.au with your pool size, roof height and the distance from the equipment pad to the roof and we will confirm the right size before you buy.
Pump Sizing
If you are unsure of pump size, please call Beasley Pool Heating for the correct sizing of your Waterco Supastream pump, as size does matter. If the pump is too small, not enough water will flow through the system. If the pump is too big, too much water will flow through the system and minimise heating efficiency. The distance between the pool equipment and the solar kit, plus the height of the roof, all affect the calculation.
Available in 0.5hp ($550), 0.75hp ($700) and 1hp ($800).